Anodizing Equipment Information

Posted by admin on December 22nd, 2008 at 10:38pm

Anodizing Equipment Information

Manufacturers and distributors of anodizing equipment and supplies.

Alpha Process
Aluminum Cathode System
Anodizing Package Module
Anodizing Package Module
Chiller Systems Available Rectifiers
Engineered Systems Division Chiller Systems

Available Rectifiers Designed Systems DivisionAdditional Information anodizing,aluminum anodizing,anodizing equipment,anodizing kits
Watropur Watropur Waste Minimization

Anodizing Package Module
For the serious business minded shop
A complete anodizing system including state of the art equipment for the professional shop. It includes everything needed to run the most common Type II anodized aluminum parts in single modularized section taking up only an area of 4′X10′.
Here is what is supplied in the package:
1) 1-12 station polypro tank module with compartments sized at 18″X 24″X30 deep”. These stations are as follows: 1-cleaner,2-rinse,3-etch,4-rinse,5-deoxidzer,6-rinse,7-anodize,8-spray rinse,9-rinse,10- seal,11-spray rinse,12-hot rinse.
2) Rectifier -SCR 100amp/24 volt with digital ramp and timer
3) 2 ton chiller with circulation pump
4) N>TEC aluminum bussing system, heat exchanger, and a sparger system with low pressure blower
5) Heaters and controllers to maintain temperatures.
6) 1 all purpose Aluminum rack
7) Instruction manual, test panels and 4 hrs of phone consulting
The set up is complete and ready for your maintenance people to connect*. Just bring water and power to the terminals provided and fill with appropriate solutions defined in the instruction manual. A Hard coat Type III option is available.

Related posts:

1. Chrom Information? I wanted to note if anyone could tell me where...
2. Type 3 anodizing setup Hi there, Our shop is looking at doing our anodizing...
3. Information? Hello, I have been looking at the Caswell Kits, and...
4. Is this the correct equipment for me? Hi guys, I’m in need of some advice. I currently...
5. Confusion with concentrate part A and B with Copy Cad/Zinc Kit I bought a 1.5g Copy Cad/Zinc kit earlier this year...

Tags: Anodizing Equipment

Under Uncategorized