ANODIZING EQUIPMENTS

CycleSolv is a chemical services company located in Wilmington, Delaware providing a complete range of chemical treatment services for various industries who are using chemicals as part of their production process such as publishers, car manufacturers, pharmaceuticals to name a few. We go to your workplace and provide on-site recovery services, including recycling of spent solvent streams, disposal of wastes including non-hazardous waste, and sales of specialty chemicals and solvents.

We supply a wide range of organic compounds, pharmaceuticals, intermediates, non-hazardous solvents, cleaning agents and detergents. We have the ability to deliver hard to find chemical products with competitive prices.

Ordered products can be shipped from our warehouse in Wilmington, DE or directly from our suppliers.

Solvent Recycling Services

CycleSolv provides distillation services either on-site or off-site with our fleet of mobile recycling units. We can recycle non-hazardous materials at our facility and hazardous materials at the generators facility. In addition to our own operation, we have recently acquired Engov Ltd and its twenty years of experience in the recycling industry.

Our unique distillation systems are targeted to the generator of 4 drums or more of waste solvent. You no longer have to dispose of a “paid for” resource, adding to the list of regulations that you must comply to. Minimize your waste on-site. Re-use your solvent streams and save 50% or more

We DEAL with your industrial waste problems. Our service is quick and clean. We come to your location, recycle your waste, and arrange for your waste to be removed within a day or two. One phone call and its done. No wasted manpower. No wasted operation time. No wasted labeling time.

Solvent Recycling for Various Industries

Potential industries that needs to outsource their recycling services are in the fields of Metals Cleaning, Technical Cleaning, Printing Plate Wash, Printing, Fiberglass, Yacht Building, Automotive, Polymer and Resin Manufacturing, Electronic Painting and Coating, Tag and Label Industry, Envelope Industry, Tape Manufacturing, Pharmaceuticals to name a few. If your firm does have similar problem encountered by these industries and it has cost you a lot (manpower, machine purchases, etc.) to deal with it then contact us and we will help provide you a solution that may reduce these bulgy monthly expenses. The best part here is that we will handle all these tasks on-site.

Contact Us

* Phone: 302-894-9400
* Fax: 302-894-9450
* info@cyclesolv.com
* Mailing address: P.O. Box 3067 Wilmington, DE 19804
* Physical Address: 301 Ruthar Drive, Newark DE 19711
* Website: Solvent Recycling

I know this is probably the wrong forum to ask this question but I’m having difficulty finding experts in metal working on the web. Hopefully, the group will not mind answering my off topic questions. I’m working on a project to develop a new bbq grill concept. I was hoping someone could help me learn more about manufacturing techniques. Listed below are a few questions I was hoping someone could answer…

1) I want to produce a charcoal grill that is similar to a Weber grill but has an oval shape. What type of manufacturing process is used to produce this type of item?

2) Weber typically uses steel for their grills. I have issues with weight and was hoping to use aluminum or an alternative material to steel that is lighter. Would aluminum work in a high heat environment?

3) How much more expensive is aluminum than steel?

Thanks in advance

Hi all, I’m new to anodizing but not to metalworking. All my applications are art so they don’t have the rigor or precision of industrial work, more because I try to keep costs down (art not being as profitable as manufacturing haha) than because I’m sloppy.

I’ve got a little home tank arrangement, about 7 gallons in a garbage can, and I can’t get any 6061 or 6063 plate for my cathodes. Figuring that TI doesn’t anodize (under AL settings anyway), I plasma-cut a thin TI plate I had around into two cathodes and put them on either side of my tank. I’ve done 3 pieces with them and they seem to work all right – mind that I already had some dissolved AL in the bath from messing around with pie-tin cathodes and Reynolds Wrap

I’ve been told TI shouldn’t be used for a cathode, maybe b/c TI oxide will taint the tank. Nobody seems to be sure. Anyway all it does is blacken a bit, no sign of dissolution, I rinse it off and take it round again. Won’t this keep the bath from loading with dissolved AL, prolonging its life? I hope someone can explain the reasoning behind NOT using TI cathodes b/c the interweb is proving useless for that. Thanks!

Dose anyone out there know of a solution that will change powder to liquid and is water based? Ya’ll have a Blessed Holidat season!!!

Sunrise Aluminium (Shenzhen) Co., Ltd
Features Specifications: aluminum Profiles
Features:
1) A total of 200 choices in powder coating benefits enable an expansive room of design
2) With stable performance, stubborn and firm paint adhesion, and acid, salt corrosion, weathering, slurry and aging resistance, the spray layer will not volatilize and oxidized in the air
3) The coating is also comprised of non-toxic compounds without any environmental threat
4) The dirt on the surface could easily be removed by rising with water and the shining surface will reappear .

Established in 1984, Sunrise Aluminium (Shenzhen) Co., Ltd. is a wholly owned subsidiary of Sunrise Aluminium (H.K.) Co., Ltd. We are a registered aluminum extruder manufacturer, of which the business is involved in Hong Kong, Australia, Singapore, the United States, Switzerland, France, Germany and China. Meanwhile, our factory is located in Shenzhen, covering an area of over 65,000 square meters, and we have invested over USD18,000,000 in plant development.

Moreover, we are equipped with advanced production equipment ranging from 500MT, 880MT, 920MT, 1460MT to 2,100MT extrusion press machines. Our annual production capacity has exceeded 18,000 metric tons. Additionally, we are also an integrated manufacturer of aluminum products specialized in standard profiles as well as custom, architectural, industrial extrusions and casting products. The operating autonomy includes billet casting, die design and manufacturing, aluminum extrusions, finishing (anodizing in silver, bronze, champagne, black and gold colors), lacquering, powder coating, liquid coating, fluorocarbon spraying in different colors, thermal improvement, fabrication, assembly and packaging. All of these processes are done on-site. We also have a complete production line for producing aluminum windows and related accessories.

We implement strict quality control procedures in the company and plant, from buying raw materials, taking purchase orders, production, inspection, packaging to delivering final goods. Our quality inspection is carried out at every stage of the manufacturing process from the beginning to the end. Furthermore, we have our own labs equipped with most advanced instruments for quality testing and inspection to ensure superior quality that meets worldwide clients’ specifications and requirements. We issue full mill certificates for overseas clients.

Above all, we are dedicated to meeting and exceeding our clients’ expectations coupled with total satisfaction. Our management puts emphasis on the principle of “fulfilling all clients’ needs, creating value-added service, constantly improving manufacturing skills, producing superb quality products”.

We are here to serve all of your aluminum needs, to help build a better world and to protect the environment by promoting the use of aluminum. Please feel free to contact us for more details.